Skip to main content

Siemens HiPath 4000

These instructions help you configure your Siemens HiPath 4000 phone system to work with TIM Enterprise. Contact your system maintainer if you are not familiar with the configuration of your PBX.

Support files​

Ensure the following support files exist in the /config/ folder of the TIM Enterprise application:

Siemens HiPath 4000.TDT
Siemens HiPath 4000.TDS

Contents​

Configure the SMDR output​

info

You may need to purchase a license to enable SMDR on this PBX. Please speak to your system maintainer if you are unsure.

By default, the SMDR output of a Siemens HiPath 4000 phone system is not enabled. For information about how to configure the output for incoming, outgoing and internal calls, contact your system maintainer.

Configure The TIM Enterprise​

Follow the steps below to configure TIM Enterprise to connect to your Siemens HiPath 4000:

  1. Click on the Directory tab.

  2. If you don't have a PBX object, press New object and select PBX. Name your site and then select Add. Locate the PBX object you want to configure in the Directory, click on it and select Properties.

  3. A new window will open, displaying the general properties of your PBX object. Select Siemens HiPath 4000 from the Data format list and tick the Keep a local backup of data box, as shown below:

    TIM Enterprise PBX General Properties

  4. Click on the Connection tab and select Establish TCP connection to PBX from the Connection method list.

  5. In the Host field, enter the IP address of your telephone system.

  6. In the Port field, enter 9000.

  7. Leave the Username and Password fields blank.

  8. In the IP script field, select Generic Simple from the drop-down list.

    TIM Enterprise PBX Connection Properties

  9. Click on the Save button to apply the settings.